Daimler Truck Diagnostics Hardware

Correctly diagnose potential faults in your customers’ vehicles right away thanks to our diagnostic solutions – and react with targeted repairs and maintenance. Sounds good, doesn’t it? We think so, too.

Product Information

1. Daimler Truck Diagnostics Kit

The Daimler Truck Diagnostics Kit 1 consists of two hardware components that can be quickly and easily integrated into your IT landscape:

Daimler Truck Diagnostics Kit 1 - Components:

Daimler Truck Diagnostics Kit 1 (diagnosis computer) features pre-installed diagnosis software and operating tools
Daimler Truck Diagnostics VCI (multiplexer) serves as interface/translator between vehicle and diagnosis computer
OBD cable (16pin) and USB cable (5 meter)
Power supply unit inclusive mains plug

Functions:

Basic diagnostics functions, for example

Quick test
Actuation
Displays actual and target values
Guided troubleshooting

Further functionalities, including

Control module commissioning
Reference to other applications, such as XENTRY Truck TIPS, XENTRY Truck WIS, Xentry Truck Operation Time

Your benefits at a glance:

Easier to use

13.3 inch, multitouch, full HD display with a brightness of 400 nits.
Daimler Truck Diagnostics Pad 1 comes with four USB type A 3.0 ports and one USB type C port.
Located on the front side are two buttons that you can configure individually using ConfigAssist.
To provide a more stable WiFi connection to Daimler Truck Diagnostics VCI, a dedicated WiFi card is installed.

Much faster and more convenient

Daimler Truck Diagnostics Pad 1 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz).
The main memory has 16 GB DDR4.
1 TB SSD hard drive (with 3000 MB/s read and write speed).
The battery lasts for up to 8 hours.
Daimler Truck Diagnostics Pad 1 is passively cooled and therefore it does not have a fan.

order here

2. Daimler Truck Accessories

Additional options are available with uniquely developed accessories for Daimler Truck Diagnostics VCI and Daimler Truck Diagnostics Pad 1.

Accessories for Daimler Truck Diagnostics VCI (multiplexer)

The following accessories are available for Daimler Truck Diagnostics VCI:

OBD cable (16-pin)
USB cable (5 m)

Accessories for the Daimler Truck Diagnostics Pad 1 (diagnosis computer)

The following accessories are available for the Daimler Truck Diagnostics Pad 1:

Power supply unit including power supply plug
Car charger
New Aluminium Pad pen
Further accessories are currently being evaluated and will be added continuously to the DTD shop

order here

Role and Rights Requirements

Important information:

To be able to use Daimler Truck Diagnostics software, you need to apply for additional diagnosis user rights. A distinction is made between two types of user rights:

Daimler Truck Diagnostics Standard Diagnostics Role (for diagnosis users without flash authorization, in example for reading fault memories)
Daimler Truck Diagnostics Flash Role (corresponds to the former XENTRY Flash user)

Please use one of the following options:

Daimler Truck Diagnostics Standard Diagnostics Role:

Every diagnosis user must independently request the Standard Diagnosis rights via UMAS and run through the one-off identification process. It may also be necessary for the market-specific ISP support to create the user in ALICE if they do not yet have a user ID.

Daimler Truck Diagnostics Flash Role:

User already has Flash rights: Every Flash user must independently go through the one-off identification process at UMAS
User does not have Flash rights: User must request Daimler Truck Diagnostics Flash Role through the market-specific channel and go through the one-off identification process at UMAS

Order Here:

Important Information on SERMI Legislation and Process

Please note: An additional role requirement in relation to SERMI becomes effective for 3rd Parties (ISP) within the RMI Regulation as of 1st October 2023. The country-specific start dates will vary as not all Member States have an accredited Conformity Assessment Body (CAB) available in time.

SERMI has been created as part of the requirements of the Delegated Regulation (EU) N° 2021/1244, Regulation (EU) N° 2018/858 and Regulation (EC) N° 692/2008, which grant standardised access to technical information whilst establishing specific provisions for access to vehicle security features

Most important facts:

Unrestricted access to Daimler Trucks security related information (SERMI) will no longer be possible.
The additional SERMI authentication will be required for theft relevant diagnostic processes e.g., replacement and reprogramming of theft-relevant control units or electronic vehicle keys.
Specific access procedures need to be executed by independent operators (ISP) and their employees to receive access to security related Diagnostic Truck Software
For every SERMI country, at least one Conformity Assessment Body (CAB) is responsible for the authorization. Independent operators and their employees need to contact their respective CAB. Information on the countries’ varying CAB readiness as well as further procedure information can be found on www.vehiclesermi.eu
The acquired SERMI certificate form the local CAB then needs to be uploaded to the SERMI Trustcenter (one Trustcenter responsible for all SERMI markets)
After successful completion of the above-mentioned access procedures, ISPs can authenticate for the new Daimler Trucks SERMI role via UMAS

To execute theft relevant diagnostic processes, users must still meet all the following known prerequisites:

Valid Daimler Truck Diagnostics Standard Diagnostic Role (requestable via UMAS)
Valid Daimler Truck Diagnostics Flash Role (requestable via market form)
Confirmation of successful participation in Daimler Truck Flash- and FBS-eTraining for ISPs (requestable via: Truck Training Platform )

For information & help, please refer to our SERMI Quick Guide for Independent Operators:

Quick Guide SERMI